Wolfpawn 4040 Pro — Hardwood - Walnut
Notes
Machines beautifully. Climb cut on final pass for glassy surface. Very satisfying material.
Tips
Oil finish after machining brings out grain dramatically.
Details
Machines beautifully. Climb cut on final pass for glassy surface. Very satisfying material.
Bit Selection
| Setting | Value |
|---|---|
| Bit Profile | 1/8" 2-flute upcut carbide |
Profile / Pocket
| Setting | Value |
|---|---|
| Rpm | 9000 RPM |
| Feed Rate | 800 mm/min |
| Plunge Rate | 200 mm/min |
| Doc | 1.5 mm per pass |
Finishing
| Setting | Value |
|---|---|
| Finish Feed | 1000 mm/min |
| Finish Stepover | 5-8% |
V-Carving
| Setting | Value |
|---|---|
| V Carve Feed | 1000 mm/min |
| V Carve Rpm | 9000 RPM |
Tips
Oil finish after machining brings out grain dramatically.