Audi A5 2.0 TFSI — Timing Chain Reassembly Notes

Audi A5 2.0 TFSI — Timing Chain Reassembly Notes Vehicle 2011 Audi A5 2.0 TFSI (CAEB engine code) Status: Post head gasket / machine shop — timing chain reassembly in progress Current Status Head machined, new gasket installed TDC set, cams out Upper timing chain guide seating — in progress Cam and crank timing tools on hand Timing Chain System (CAEB) Assembly Sequence 1. Set crank to TDC (mark on crank pulley to timing cover reference) 2. Install lower chain guide 3. Thread primary chain around crank sprocket and intermediate shaft 4. Install upper chain guide (this is the tricky one — seats in groove) 5. Install primary chain tensioner 6. Install secondary chain (cam side) 7. Install cam sprockets — verify marks align 8. Install secondary tensioner 9. Remove tensioner lock pins 10. Rotate engine 2x by hand — verify TDC marks realign Upper Chain Guide — Known Issue The upper guide snaps into a groove in the block. Must be fully seated before installing tensioner. With cams out, access is easier but still tight. Approach: Use a long flat pick to guide the tab into the groove Confirm with a mirror/flashlight before proceeding Do not force tensioner if guide is not fully seated Cam Timing Marks (CAEB) Intake cam: mark at 12 o'clock when at TDC Exhaust cam: mark at 12 o'clock when at TDC Crank: TDC notch aligned with reference on front cover Torque Specs (Key)

Related Guides

Loading_