Flipper Zero — IR, Sub-GHz and NFC Cheat Sheet
flipper zeroirinfraredsub ghznfcrfidradio1c3d
Markdown
Flipper Zero — IR, Sub-GHz, and NFC Cheat Sheet
Infrared (IR)
| Setting | Value |
|---|---|
| Carrier frequency | 38 kHz (standard) |
| Range | ~5m line-of-sight |
| File format | .ir |
| Signal location | /ext/infrared/ |
Capture: IR > Learn New Remote > point remote at Flipper Raw capture: IR > Learn New Remote > Raw — works on non-standard remotes
Sub-GHz
| Band | Common Uses |
|---|---|
| 315 MHz | US garage doors (older) |
| 433.92 MHz | EU garage doors, weather stations |
| 868 MHz | EU IoT, smart home |
| 915 MHz | US IoT, LoRa |
Rolling code systems (modern cars) cannot be replayed — one-time codes. Static code systems (older remotes) can be captured and replayed.
NFC and RFID
| Type | Freq | Read | Emulate |
|---|---|---|---|
| EM4100 (125kHz) | 125 kHz | Yes | Yes |
| HID Prox | 125 kHz | Yes | Yes |
| Mifare Classic | 13.56 MHz | Partial | Yes |
| Mifare Ultralight | 13.56 MHz | Yes | Yes |
125 kHz cards: use RFID menu. 13.56 MHz cards: use NFC menu.