Genmitsu VG05B — 60° V-Groove
Genmitsu
Overview
60-degree V-groove bit for general V-carving and lettering. Shank: 1/8in (3.175mm). Included angle: 60 degrees. Single flute. Max RPM: 24,000. The most versatile V-bit for signs and lettering - wide enough for bold strokes, narrow enough for detail.
Properties
Difficulty
beginner
Pros
- Standard V-carve angle — works for most signs and text
- Creates crisp letter edges
- Self-jigging — wider letters automatically deeper
- Included in MC40A set
- No flat bottom needed
Cons
- Cuts wider than other V angles — not for fine micro text
- Point is fragile if plunged straight down
Best For
- Sign lettering 10-75mm
- decorative borders
- most V-carving projects
- chamfering edges on boards
- general wood V-carving
Avoid For
- Very fine small text under 8mm (use 30 degree)
- very large bold text over 75mm (use 90 degree)
- pocketing
- profile cuts
Storage
Dry storage. Point is fragile — protect tip.
Brands
Genmitsu (SainSmart)