Rubber Stamp Material
Overview
Pre-mounted rubber stamp material with foam backing for easy laser engraving and mounting. Combines the engraving rubber layer with adhesive foam backing and wood mount block for ready-to-use stamps. Simplifies the stamp-making process by eliminating separate mounting steps.
Properties
Difficulty
intermediate
Pros
- All-in-one stamp solution
- Foam backing provides cushion
- Ready to mount
- Consistent quality
- Easy to produce finished stamps
Cons
- More expensive than raw rubber
- Limited sizes
- Foam can melt if overpowered
- Still produces rubber odor
Best For
- Custom stamp making
- business stamps
- craft stamps
- quick stamp production
Avoid For
- Diode lasers (poor results vs CO2)
- PVC-based stamping materials (toxic fumes)
- very fine hairline detail
Laser Compatibility
Laser-engrave rubber removes material to create raised stamp surface. CO2: engrave deep at 200mm/s 50-60W. Diode: 200mm/s 90-100% for deep removal. Produces strong rubber fumes — strong ventilation required. Multiple passes for depth.
Brands
Trotec Stamping BlueEpilog rubberMilestoneTrodat rubber4lawn laser rubber