Workshop — Feeds and Speeds Quick Reference

Workshop — Feeds and Speeds Quick Reference Conservative starting points for desktop CNC (Wolfpawn 4040, Genmitsu 3018, etc.). Always run a test cut on scrap first. Key Concepts RPM — spindle speed (desktop CNCs: 8,000-30,000 RPM) Feed Rate — tool movement speed through material (mm/min) Depth of Cut (DOC) — how deep each pass cuts Chip Load — material removed per flute per rev (target 0.025-0.075mm for wood) 1/8" (3.175mm) Bit Settings 1/4" (6.35mm) Bit Settings Troubleshooting Key GRBL Settings Links FSWizard feeds and speeds calculator GRBL settings reference Carbide 3D feeds and speeds

Related Guides

• Feeds, Speeds, and Chip Load for Hobby CNC
• CNC Router Feeds and Speeds for Wood: A Beginner's Guide
• Wolfpawn 4040 Pro — Material Settings Reference
• Workshop Dust Collection: Setup Guide for Makers and CNC Users
• 240V Shop Wiring for CNC/Laser/Compressor
• CNC Feeds and Speeds Explained: Chip Load, RPM, and Reading the Cut
• Hearing Protection and Noise Control in a Maker Shop: Router, CNC, and Shop-Vac Noise Levels
• How to Build a DIY Cyclone Dust Collector for Your Shop