Creality Ender-3 S1
Creality
⊕ Heated Bed
⬦ Auto-Level
200
mm/s
Max Speed
260°
C
Hotend
100°
C
Bed
50
µm
Min Layer
General
Width (X)
220.0 mm
Depth (Y)
220.0 mm
Height (Z)
270.0 mm
Connection
USB · SD Card
Controller
Marlin
Print Specs
Nozzle
0.4 mm
Filament
1.75 mm
Extruders
1
Compatible Materials
PLAPETGABSTPU
Software
Creality SlicerCuraOrca Slicer
About the Creality Ender-3 S1
The Creality Ender-3 S1 is an FDM 3D printer, released in 2022. Its work area is 220×220×270mm.
It uses a 0.4 mm nozzle for 1.75 mm filament, a rated top speed of 200 mm/s, a minimum layer height of 50 µm.
The hotend tops out at 260°C and the bed at 100°C, which covers PLA, PETG, ABS and ASA but is marginal for nylon and polycarbonate.
The machine levels the bed automatically.
The machine runs Marlin, connects over USB · SD Card.
Supported software: Creality Slicer, Cura, Orca Slicer.
Materials listed: PLA, PETG, ABS, TPU.
More from Creality
- Creality Ender-3 V3 Plus
- Creality K1 SE
- Creality K1C
- Creality K2
- Creality K2 Plus
- Creality K2 Pro
- Creality CR-10 SE
- Creality CR-M4