Notes
Powder-coated metal marks via the laser vaporizing the coating. Leaves a permanent bare metal mark.
Tips
This is marking only — the laser removes coating, not metal. Focus on the surface. Low power setting for clean marks without bubbling the surrounding coating.
Details
Powder-coated metal marks via the laser vaporizing the coating. Leaves a permanent bare metal mark.
Cutting
| Setting | Value |
|---|---|
| Cut Note | (cannot cut metal) |
Engraving
| Setting | Value |
|---|---|
| Engrave Fill | 1500 mm/min @ 50% |
Settings
| Setting | Value |
|---|---|
| Air Assist | On (required) |
Tips
This is marking only — the laser removes coating, not metal. Focus on the surface. Low power setting for clean marks without bubbling the surrounding coating.