Notes
Leather on LM3 10W engraves with excellent detail. Cutting requires multiple passes.
Tips
For engraving, run 2 passes at lower power for depth. For cutting, 3+ passes may be needed.
Details
Leather on LM3 10W engraves with excellent detail. Cutting requires multiple passes.
Cutting
| Setting | Value |
|---|---|
| Cut 3mm | 2000 mm/min @ 80% × 2-3 passes |
Engraving
| Setting | Value |
|---|---|
| Engrave Fill | 4000 mm/min @ 25% |
Settings
| Setting | Value |
|---|---|
| Air Assist | Low for engrave, high for cut |
Tips
For engraving, run 2 passes at lower power for depth. For cutting, 3+ passes may be needed.