Phrozen Aqua 8K Resin
Phrozen
42
°C
Max Service
Overview
Low-odor, water-washable photopolymer optimised for Phrozen's 8K MSLA printers. Formulated for minimal VOC emission without sacrificing detail. Washes with plain water — no IPA needed. Entry-level water washable with better properties than most generic options.
Properties
Difficulty
beginner
Flexibility
rigid
Layer Adhesion
excellent
Enclosure
required
Heated Bed
no
Dry Storage
no
Pros
- Wash with plain water — eliminates IPA cost and smell
- Very low odor — suitable for less-ventilated spaces
- High detail resolution (8K optimised)
- Fast cure times
- Good range of colors
- Easy beginner experience
Cons
- Wastewater must be UV-cured before drain disposal
- More brittle than standard resins
- Slight reduction in mechanical properties vs IPA-wash resins
- Limited to display/hobby use
- Can be sticky if undercured
Best For
- Miniatures|Tabletop gaming models|Display pieces|Beginners|Indoor printing environments|Water-friendly cleanup workflows
Avoid For
- Functional mechanical parts|High-impact parts|Outdoor display|Production workflows
Storage
Store sealed away from light. Water-washable resins are slightly more moisture-sensitive than standard. UV-cure wastewater in a clear container before drain disposal — mandatory.
Brands
Phrozen