Wood Fill PLA
195–220
°C
Print Temp
50–65
°C
Bed Temp
55
°C
Max Service
Overview
PLA blended with real wood fiber (typically 30-40% wood). Sands, stains, and paints like real wood. Unique rough texture replicates wood grain. Abrasive - hardened nozzle for extended use. Print 195-220C nozzle, 50-65C bed.
Properties
Difficulty
intermediate
Flexibility
rigid
Layer Adhesion
fair
Enclosure
no
Heated Bed
recommended
Dry Storage
recommended
Pros
- Sands and stains like real wood
- Unique aesthetic
- Can be finished with wood oil and stain
- Lower warp than PLA
- Great for decorative objects
Cons
- Abrasive - wears brass nozzle
- Rough surface out of printer
- Can clog small nozzles
- Not water resistant without sealing
Best For
- Picture frames
- figurines
- decorative boxes
- art objects
- sculpture prototypes
- architectural models
Avoid For
- Outdoor use without sealing
- mechanical parts
- fine detail prints
- wet environments
Storage
Same as PLA. Wood particles can absorb moisture - dry 4h at 45C if texture looks rough.
Brands
Polymaker PolyWoodeSUN Wood PLAHatchbox WoodSunlu WoodColorFabb Woodfill Fine