Anycubic Kobra 2
Anycubic
⊕ Heated Bed
⬦ Auto-Level
300
mm/s
Max Speed
260°
C
Hotend
90°
C
Bed
50
µm
Min Layer
General
Width (X)
220.0 mm
Depth (Y)
220.0 mm
Height (Z)
250.0 mm
Connection
USB · WiFi
Controller
Klipper
Print Specs
Nozzle
0.4 mm
Filament
1.75 mm
Extruders
1
Compatible Materials
PLAPETGABSTPUASA
Software
Anycubic SlicerOrca SlicerCura
About the Anycubic Kobra 2
The Anycubic Kobra 2 is an FDM 3D printer, released in 2023. Its work area is 220×220×250mm.
It uses a 0.4 mm nozzle for 1.75 mm filament, a rated top speed of 300 mm/s, a minimum layer height of 50 µm.
The hotend tops out at 260°C and the bed at 90°C, which covers PLA, PETG, ABS and ASA but is marginal for nylon and polycarbonate.
The machine levels the bed automatically.
The machine runs Klipper, connects over USB · WiFi.
Supported software: Anycubic Slicer, Orca Slicer, Cura.
Materials listed: PLA, PETG, ABS, TPU, ASA.
More from Anycubic
- Anycubic Kobra 3
- Anycubic Kobra S1
- Anycubic Kobra 2 Max
- Anycubic Kobra 2 Neo
- Anycubic Kobra 2 Plus
- Anycubic Kobra 2 Pro
- Anycubic Photon Mono 2
- Anycubic Photon Mono M5s