Flashforge Guider 2s
Flashforge
⊕ Heated Bed
◻ Enclosure
⬦ Auto-Level
200
mm/s
Max Speed
300°
C
Hotend
120°
C
Bed
50
µm
Min Layer
General
Width (X)
140.0 mm
Depth (Y)
125.0 mm
Height (Z)
300.0 mm
Connection
USB · WiFi · Ethernet
Controller
Marlin
G-Code Flavor
marlin
Print Specs
Nozzle
0.4 mm
Filament
1.75 mm
Extruders
1
Compatible Materials
PLAPETGABSTPUASAPAPC
Software
FlashPrintCura
About the Flashforge Guider 2s
The Flashforge Guider 2s is an FDM 3D printer, released in 2020. Its work area is 140×125×300mm.
It uses a 0.4 mm nozzle for 1.75 mm filament, a rated top speed of 200 mm/s, a minimum layer height of 50 µm.
The hotend tops out at 300°C and the bed at 120°C, which is high enough for engineering filaments such as nylon, polycarbonate and carbon-fiber blends.
The machine comes enclosed, which helps with ABS and ASA, levels the bed automatically.
The machine runs Marlin, connects over USB · WiFi · Ethernet.
Supported software: FlashPrint, Cura.
Materials listed: PLA, PETG, ABS, TPU, ASA, PA, PC.
More from Flashforge
- Flashforge AD5X
- Flashforge Adventurer 5M
- Flashforge Adventurer 5M Pro
- Flashforge Artemis
- Flashforge Guider 3 Ultra
- Flashforge Guider4
- Flashforge Guider4 0.4 HF nozzle
- Flashforge Guider4 0.6 HF nozzle