Sovol SV08
Sovol
⊕ Heated Bed
⬦ Auto-Level
700
mm/s
Max Speed
300°
C
Hotend
100°
C
Bed
50
µm
Min Layer
General
Width (X)
350.0 mm
Depth (Y)
350.0 mm
Height (Z)
345.0 mm
Connection
USB · WiFi · LAN
Controller
Klipper
G-Code Flavor
klipper
Print Specs
Nozzle
0.4 mm
Filament
1.75 mm
Extruders
1
Compatible Materials
PLAPETGABSTPUASAPA
Software
CuraOrca Slicer
About the Sovol SV08
The Sovol SV08 is an FDM 3D printer, released in 2024. Its work area is 350×350×345mm.
It uses a 0.4 mm nozzle for 1.75 mm filament, a rated top speed of 700 mm/s, a minimum layer height of 50 µm.
The hotend tops out at 300°C and the bed at 100°C, which is high enough for engineering filaments such as nylon, polycarbonate and carbon-fiber blends.
The machine levels the bed automatically.
The machine runs Klipper, connects over USB · WiFi · LAN.
Supported software: Cura, Orca Slicer.
Materials listed: PLA, PETG, ABS, TPU, ASA, PA.
More from Sovol
- Sovol SV08 MAX
- Sovol SV06 0.4 High-Speed nozzle
- Sovol SV06 ACE
- Sovol SV06 Plus ACE
- Sovol SV07
- Sovol SV07 Plus
- Sovol Zero
- Sovol SV05