Voron 0.1
Voron
⊕ Heated Bed
◻ Enclosure
⬦ Auto-Level
300
mm/s
Max Speed
300°
C
Hotend
110°
C
Bed
50
µm
Min Layer
General
Width (X)
120.0 mm
Depth (Y)
120.0 mm
Height (Z)
120.0 mm
Connection
USB · WiFi · LAN
Controller
Klipper
Print Specs
Nozzle
0.4 mm
Filament
1.75 mm
Extruders
1
Compatible Materials
PLAPETGABSTPUASAPA
Software
Orca SlicerPrusaSlicer
About the Voron 0.1
The Voron 0.1 is an FDM 3D printer, released in 2021. Its work area is 120×120×120mm.
It uses a 0.4 mm nozzle for 1.75 mm filament, a rated top speed of 300 mm/s, a minimum layer height of 50 µm.
The hotend tops out at 300°C and the bed at 110°C, which is high enough for engineering filaments such as nylon, polycarbonate and carbon-fiber blends.
The machine comes enclosed, which helps with ABS and ASA, levels the bed automatically.
The machine runs Klipper, connects over USB · WiFi · LAN.
Supported software: Orca Slicer, PrusaSlicer.
Materials listed: PLA, PETG, ABS, TPU, ASA, PA.
More from Voron
- Voron Trident 250
- Voron Trident 300
- Voron Trident 350
- Voron 2.4 250
- Voron 2.4 300
- Voron 2.4 350
- Voron Switchwire 250