CNC Bit Reference — 2-Flute Downcut — 1/8"
Notes
Use as the finish pass bit on plywood where top edge quality matters.
Tips
On thick material use upcut for roughing then downcut finish pass.
Details
Use as the finish pass bit on plywood where top edge quality matters.
Specs
| Setting | Value |
|---|---|
| Shank | 1/8" (3.175mm) |
| Flutes | 2 — downcut spiral |
| Material | Carbide |
Limits
| Setting | Value |
|---|---|
| Max Rpm | 30000 RPM |
Applications
| Setting | Value |
|---|---|
| Best For | Plywood top face, veneers, painted MDF |
Settings
| Setting | Value |
|---|---|
| Rpm | 8000-9000 RPM |
| Feed | 700-1000 mm/min |
| Doc | 1.0-1.5 mm per pass |
Tips
On thick material use upcut for roughing then downcut finish pass.