Creality Ender-3 Neo Max — PETG
Notes
PETG on Creality Ender-3 Neo Max. Good strength and temp resistance. Slightly stringy but manageable.
Tips
PETG bonds aggressively to bare glass/PEI. Use a thin glue stick layer or adjust Z-offset.
Details
PETG on Creality Ender-3 Neo Max. Good strength and temp resistance. Slightly stringy but manageable.
Temperature
| Setting | Value |
|---|---|
| Nozzle Temp | 230-250 °C |
| Bed Temp | 70 °C |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 30-50 % |
Speed
| Setting | Value |
|---|---|
| Print Speed | 40-60 mm/s |
| First Layer Speed | 20-25 mm/s |
Retraction
| Setting | Value |
|---|---|
| Retraction | 1.0-2.0 mm (direct drive) |
| Retraction Speed | 45 mm/s |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm |
Tips
PETG bonds aggressively to bare glass/PEI. Use a thin glue stick layer or adjust Z-offset.