Notes
PETG on V3 SE works well. The Sprite extruder handles PETG reliably at moderate speeds.
Tips
Slow down to 50mm/s. PETG can stick too hard to smooth glass — use PEI or hairspray on glass.
Details
PETG on V3 SE works well. The Sprite extruder handles PETG reliably at moderate speeds.
Temperatures
| Setting | Value |
|---|---|
| Nozzle | 235 °C |
| Bed | 80 °C |
| First Layer Bed | 85 °C |
Speed
| Setting | Value |
|---|---|
| Print Speed | 50 mm/s |
| First Layer Speed | 20 mm/s |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 40 % |
| Fan First Layer | 0 % |
Retraction
| Setting | Value |
|---|---|
| Distance | 1.5 mm |
| Speed | 35 mm/s |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm |
Tips
Slow down to 50mm/s. PETG can stick too hard to smooth glass — use PEI or hairspray on glass.