Notes
Neptune 4 can print ASA with Klipper tuning but is open-frame. Smaller parts work fine; large prints risk warping.
Tips
Add enclosure for best results. Use glue stick or hairspray on PEI for adhesion. Print in a draft-free location.
Details
Neptune 4 can print ASA with Klipper tuning but is open-frame. Smaller parts work fine; large prints risk warping.
Temperatures
| Setting | Value |
|---|---|
| Nozzle | 260 °C |
| Bed | 100 °C |
| First Layer Bed | 105 °C |
Speed
| Setting | Value |
|---|---|
| Print Speed | 100 mm/s |
| First Layer Speed | 25 mm/s |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 0 % |
Retraction
| Setting | Value |
|---|---|
| Distance | 0.8 mm |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm |
Notes
| Setting | Value |
|---|---|
| Enclosure | Strongly recommended to prevent warping important |
Tips
Add enclosure for best results. Use glue stick or hairspray on PEI for adhesion. Print in a draft-free location.