Notes
ABS on the open MK4 requires draft shields and enclosure. Add a DIY enclosure for best results.
Tips
Use PrusaSlicer draft shield. Warping is a real risk without enclosure. Consider ASA instead — better UV resistance and less warping.
Details
ABS on the open MK4 requires draft shields and enclosure. Add a DIY enclosure for best results.
Temperatures
| Setting | Value |
|---|---|
| Nozzle | 255 °C |
| Bed | 105 °C |
| First Layer Bed | 110 °C |
Speed
| Setting | Value |
|---|---|
| Print Speed | 80 mm/s |
| First Layer Speed | 20 mm/s |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 0 % |
Retraction
| Setting | Value |
|---|---|
| Distance | 1.2 mm |
| Speed | 35 mm/s |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm |
Notes
| Setting | Value |
|---|---|
| Enclosure | Strongly recommended important |
Tips
Use PrusaSlicer draft shield. Warping is a real risk without enclosure. Consider ASA instead — better UV resistance and less warping.