Notes
Balsa is the easiest material to laser cut — very low density, cuts at minimal power. Great for model making.
Tips
Reduce power significantly vs other woods. Balsa can catch fire at high power — start low and test. Ideal for RC models, architectural models.
Details
Balsa is the easiest material to laser cut — very low density, cuts at minimal power. Great for model making.
Cutting
| Setting | Value |
|---|---|
| Cut 3mm | 8000 mm/min @ 50% × 1 pass |
| Cut 6mm | 4000 mm/min @ 65% × 2 passes |
Engraving
| Setting | Value |
|---|---|
| Engrave Fill | 8000 mm/min @ 15% |
Settings
| Setting | Value |
|---|---|
| Air Assist | On (required) |
Tips
Reduce power significantly vs other woods. Balsa can catch fire at high power — start low and test. Ideal for RC models, architectural models.