Notes
Black cast acrylic cuts cleanly with diode lasers. Diode wavelength absorbs well in dark materials.
Tips
Cast acrylic only — extruded acrylic melts and re-fuses. Cut with air assist to keep edges clean and prevent melt-back.
Details
Black cast acrylic cuts cleanly with diode lasers. Diode wavelength absorbs well in dark materials.
Cutting
| Setting | Value |
|---|---|
| Cut 3mm | 1200 mm/min @ 80% × 1 pass |
| Cut 6mm | 600 mm/min @ 90% × 2 passes |
Engraving
| Setting | Value |
|---|---|
| Engrave Fill | 4500 mm/min @ 40% |
Settings
| Setting | Value |
|---|---|
| Air Assist | On (required) |
Tips
Cast acrylic only — extruded acrylic melts and re-fuses. Cut with air assist to keep edges clean and prevent melt-back.