Inland PLA+
Inland
205–225
°C
Print Temp
55–65
°C
Bed Temp
65
°C
Max Service
Overview
Inland PLA+ — Micro Center house brand. Exceptional value at $15-18/kg in-store. Consistent quality that punches well above its price point. Large following among budget-conscious US makers.
Properties
Difficulty
beginner
Flexibility
rigid
Layer Adhesion
excellent
Enclosure
no
Heated Bed
recommended
Dry Storage
no
Pros
- Excellent value per spool, consistent diameter, wide color range
Cons
- Not as tight tolerances as premium brands
Best For
- Budget-conscious US makers
- high-volume printing
- any standard FDM application where cost per kg matters
Laser Compatibility
LASER INTERACTION
Safety: SAFE — PLA base polymer. Standard ventilation sufficient.
CO2 engrave: 300-400mm/s @ 15-20% | Diode 20W: 3000mm/min @ 35%
Result: Clean dark marks. Good contrast on light colors.
Fumes: Lactic acid derivatives — low hazard.
Brands
Inland (Micro Center)