← Projects
laser beginner 10 days ago ◑ 17 views ◯ 6 min read

Build a Pepper's Ghost Illusion Display: Laser-Cut Acrylic, LED Lighting, and Video Setup

Build time: 4-6 hours
Tools needed: CO2 or diode laser cutter (Longer Ray5 20W or similar, 400-600mm bed useful for larger panels), acrylic cement or cyanoacrylate glue, a protractor or angle gauge, a smartphone or small display for the video source, soldering iron if wiring LED strips, a u
pepper's ghostlaser cuttingacrylicillusionLEDdisplayopticsholographic display
Parts List

Pepper's ghost is the nineteenth-century stage trick that still fools people at theme parks, concert stages, and museum exhibits: a sheet of clear material set at an angle reflects a hidden, brightly-lit image or video into the viewer's line of sight, so it appears to float in midair in front of a dark background. There's no actual hologram involved — it's a reflection trick that depends entirely on controlling light, angle, and contrast — which makes it a genuinely satisfying build for a laser cutter, because the whole illusion lives or dies on how cleanly you cut and align a few flat panels.

This project builds a tabletop version using a laser-cut acrylic reflector, a 3D-printed or laser-cut light-blocking enclosure, and either a phone or a small HDMI display as the hidden image source. It's a weekend build, most of the skill is in masking and cutting clean edges, and the final result scales from a desk novelty to a display-case centerpiece depending on how big your laser bed and acrylic sheet are.

How the Illusion Actually Works

A sheet of clear acrylic or glass reflects a small percentage of the light hitting it — usually 4-8% per surface for uncoated acrylic — while transmitting the rest. Normally that faint reflection is invisible because everything around it is also lit. Pepper's ghost exploits this by putting the reflective panel at roughly 45 degrees between the viewer and a completely black background, then shining a bright, high-contrast image onto the panel from a hidden angle below or to the side. Because the background behind the panel is black and unlit, there's nothing for the viewer's eye to compare the faint reflection against, so it reads as a glowing image floating in space rather than a dim reflection on a sheet of plastic.

Three things determine whether the illusion sells: how dark you can keep the "stage" behind the panel, how bright and high-contrast the hidden image source is, and how clean and distortion-free the acrylic surface is. Scratches, dust, and fingerprints on the reflective panel all show up as visible artifacts in the illusion, so edge finishing and keeping the viewing surface pristine matter more here than in most laser projects.

Designing the Reflector Panel

For a tabletop unit, a 45-degree angle between the reflector and the base is the standard starting point — it puts the viewer's eye line, the reflector, and the hidden display into a simple right-triangle relationship that's easy to reason about and easy to cut. Lay the geometry out in your design software before you touch the laser:

Cut the reflector from clear cast acrylic rather than extruded; cast sheet has better optical clarity and is less prone to the subtle waviness extruded sheet can show under raking light, which is exactly the kind of artifact that gives away the trick. Use a low-power, fast vector pass for the cut line and keep your focus dialed in precisely — a slightly out-of-focus cut leaves a frosted edge that can scatter stray light into the enclosure.

Building the Light-Blocking Enclosure

The enclosure's only job is to keep every surface the viewer can see, other than the reflector and the intended image, completely black and completely unlit. Laser-cut the body from black acrylic or MDF, and line the interior faces with black flocking sheet or matte black vinyl — gloss black acrylic still has enough specular reflection under a bright display to create ghosting artifacts of its own.

SurfaceTreatmentWhy it matters Interior walls behind the reflectorMatte black flocking or feltPrevents secondary reflections from washing out the black background the illusion depends on Edges of the reflector panelPainted black or masked with black tapeUnfinished clear edges glow and outline the panel, breaking the "floating" effect Display bezel and housingCovered with matte black card or vinylAny visible light source other than the image itself destroys the contrast the trick needs Seams and jointsLight-sealed with black silicone or felt gasket stripStray light leaking through gaps is the most common reason a first build looks "off"

Design the enclosure so the hidden display sits in its own light-isolated compartment, angled so its output bounces straight up off the back of the box and through the reflector — not aimed so it's visible by any direct path to the viewer. A simple slot-and-tab laser-cut box with a removable back panel makes it easy to adjust display position during testing before you commit to glue.

Content and Display Setup

High-contrast content with a true black background works best — animated characters, UI elements, or video shot against a black backdrop and chroma-keyed all read well. A small phone propped on an angled stand inside the enclosure is the easiest starting point; once you've got the geometry dialed in, swapping to a dedicated small HDMI panel driven by a Raspberry Pi or a cheap media player gives you a looping, hands-off display. Turn the source display's brightness all the way up and, if it's a phone, lock orientation and disable auto-sleep and notifications — a notification banner popping into your ghost image mid-demo is a classic own-goal.

Assembly and Alignment

  1. Dry-fit the enclosure and reflector before gluing anything — check the viewing angle from your actual intended seating or standing position, since "45 degrees" is a starting point, not a law.
  2. Mask and flock the interior panels before assembly; it's far easier to apply flocking sheet to flat pieces than to reach into a glued box.
  3. Bond the acrylic structural joints with acrylic cement (capillary action, applied with a fine-tip applicator along the seam) rather than cyanoacrylate for a stronger, clearer bond on structural edges.
  4. Mount the reflector last, into its slot, and seal the edge of the slot with black tape or paint so no light can leak around the panel's perimeter.
  5. Add the LED strip, if you're using one, around the viewer-facing frame only — as an attract-mode accent light, wired to an ESP32 or Arduino running a simple color-cycle sketch, and keep it physically separated from the illusion's optical path.

Troubleshooting

SymptomLikely causeFix Ghost image looks dim or washed outAmbient room light too bright, or source display too dimDim the room, increase display brightness, or add a hood/shroud over the viewing opening Double image or ghostingReflector is glass or thick acrylic causing reflections off both surfacesSwitch to thin (2-3mm) acrylic, which keeps the two surface reflections close enough together to be imperceptible Visible panel outlineUnfinished or glowing edge on the reflectorMask/paint the edges black, or recess the panel edge into a black-lined slot Image looks distorted or stretchedReflector angle doesn't match the display's mounting angleRecheck the geometry — both should sit at matching but opposite angles relative to the horizontal base

Once the core box works, the format scales in both directions: a desktop version makes a fun engraved nameplate or holiday display, while a larger floor-standing cabinet with a proper rear-projection source can run full figures or characters for a haunt, retail display, or convention booth. Either way, the acrylic and light-control work you do here transfers directly — it's the same trick, just bigger glass and a darker room.