Artillery Sidewinder X4 Pro
Artillery
⊕ Heated Bed
⬦ Auto-Level
600
mm/s
Max Speed
300°
C
Hotend
110°
C
Bed
50
µm
Min Layer
General
Width (X)
240.0 mm
Depth (Y)
250.0 mm
Height (Z)
260.0 mm
Connection
USB · WiFi · LAN
Controller
Klipper
G-Code Flavor
klipper
Print Specs
Nozzle
0.4 mm
Filament
1.75 mm
Extruders
1
Compatible Materials
PLAPETGABSTPUASAPAPLA+
Software
CuraOrca Slicer
About the Artillery Sidewinder X4 Pro
The Artillery Sidewinder X4 Pro is an FDM 3D printer, released in 2024. Its work area is 240×250×260mm.
It uses a 0.4 mm nozzle for 1.75 mm filament, a rated top speed of 600 mm/s, a minimum layer height of 50 µm.
The hotend tops out at 300°C and the bed at 110°C, which is high enough for engineering filaments such as nylon, polycarbonate and carbon-fiber blends.
The machine levels the bed automatically.
The machine runs Klipper, connects over USB · WiFi · LAN.
Supported software: Cura, Orca Slicer.
Materials listed: PLA, PETG, ABS, TPU, ASA, PA, PLA+.
More from Artillery
- Artillery Sidewinder X4 Plus
- Artillery Sidewinder X3 Plus
- Artillery Sidewinder X3 Pro
- Artillery M1 Pro
- Artillery Sidewinder X2
- Artillery Genius Pro
- Artillery Hornet
- Artillery Genius