Elegoo Neptune 4 Plus
Elegoo
⊕ Heated Bed
⬦ Auto-Level
500
mm/s
Max Speed
260°
C
Hotend
110°
C
Bed
50
µm
Min Layer
General
Width (X)
320.0 mm
Depth (Y)
320.0 mm
Height (Z)
385.0 mm
Connection
USB · WiFi · LAN
Controller
Klipper
G-Code Flavor
klipper
Filament
1.75 mm
Extruders
1
Compatible Materials
PLAPETGABSTPUASA
Software
CuraOrca Slicer
About the Elegoo Neptune 4 Plus
The Elegoo Neptune 4 Plus is an FDM 3D printer, released in 2023. Its work area is 320×320×385mm.
It uses a rated top speed of 500 mm/s, a minimum layer height of 50 µm.
The hotend tops out at 260°C and the bed at 110°C, which covers PLA, PETG, ABS and ASA but is marginal for nylon and polycarbonate.
The machine levels the bed automatically.
The machine runs Klipper, connects over USB · WiFi · LAN.
Supported software: Cura, Orca Slicer.
Materials listed: PLA, PETG, ABS, TPU, ASA.