Creality Ender-3 Neo Max — PVA
Notes
PVA Support Material on Creality Ender-3 Neo Max. Water-soluble for complex support structures.
Tips
Only open spool when printing. Store sealed with desiccant — absorbs moisture very quickly.
Details
PVA Support Material on Creality Ender-3 Neo Max. Water-soluble for complex support structures.
Temperature
| Setting | Value |
|---|---|
| Nozzle Temp | 185-200 °C |
| Bed Temp | 60 °C |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 100 % |
Speed
| Setting | Value |
|---|---|
| Print Speed | 25-35 mm/s |
| First Layer Speed | 20-25 mm/s |
Retraction
| Setting | Value |
|---|---|
| Retraction | 0.5-1.0 mm (direct drive) |
| Retraction Speed | 45 mm/s |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm |
Tips
Only open spool when printing. Store sealed with desiccant — absorbs moisture very quickly.