Notes
PA12 on K1 — semi-enclosure helps. Dry filament is mandatory.
Tips
Dry 12+ hours at 80°C before printing — PA12 is extremely hygroscopic. Keep in sealed container while printing. Lower layer height improves inter-layer bonding.
Details
PA12 on K1 — semi-enclosure helps. Dry filament is mandatory.
Temperatures
| Setting | Value |
|---|---|
| Nozzle | 270 °C |
| Bed | 80 °C |
| First Layer Bed | 85 °C |
Speed
| Setting | Value |
|---|---|
| Print Speed | 60 mm/s |
| First Layer Speed | 20 mm/s |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 0 % |
Retraction
| Setting | Value |
|---|---|
| Distance | 0.6 mm |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.15 mm |
Notes
| Setting | Value |
|---|---|
| Drying | 12h @ 80°C before printing critical |
Tips
Dry 12+ hours at 80°C before printing — PA12 is extremely hygroscopic. Keep in sealed container while printing. Lower layer height improves inter-layer bonding.