Notes
K1 can attempt PC but the semi-enclosure is marginal. Smaller parts succeed; large parts warp significantly.
Tips
PC requires the highest temps of common filaments. Brim is mandatory. Dry before printing. Expect some warping without a full enclosure. Avoid drafts completely.
Details
K1 can attempt PC but the semi-enclosure is marginal. Smaller parts succeed; large parts warp significantly.
Temperatures
| Setting | Value |
|---|---|
| Nozzle | 275 °C |
| Bed | 100 °C |
| First Layer Bed | 105 °C |
Speed
| Setting | Value |
|---|---|
| Print Speed | 80 mm/s |
| First Layer Speed | 20 mm/s |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 0 % |
Retraction
| Setting | Value |
|---|---|
| Distance | 0.6 mm |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm |
Notes
| Setting | Value |
|---|---|
| Enclosure | Required — PC warps severely without it critical |
| Drying | 4-8h @ 90°C before printing required |
Tips
PC requires the highest temps of common filaments. Brim is mandatory. Dry before printing. Expect some warping without a full enclosure. Avoid drafts completely.