Notes
20W diode cuts basswood/birch ply cleanly in one pass at 3mm. Air assist is essential.
Tips
Always use air assist. Focus carefully — the D1 Pro has a fixed focus lens, use the focus block or ramp test.
Details
20W diode cuts basswood/birch ply cleanly in one pass at 3mm. Air assist is essential.
Cutting
| Setting | Value |
|---|---|
| Cut 3mm | 4000 mm/min @ 80% × 1 pass |
| Cut 6mm | 2000 mm/min @ 90% × 2 passes |
Engraving
| Setting | Value |
|---|---|
| Engrave Fill | 6000 mm/min @ 35% fill |
| Engrave Line | 3000 mm/min @ 50% line |
Settings
| Setting | Value |
|---|---|
| Air Assist | On (required) |
| Focus | Fixed — use focus block |
Tips
Always use air assist. Focus carefully — the D1 Pro has a fixed focus lens, use the focus block or ramp test.