Notes
MDF cuts very consistently — no grain or knots. Heavy smoke, good ventilation required.
Tips
MDF produces a lot of fine dust. Run maximum ventilation. Sealed edges after cutting prevent moisture absorption.
Details
MDF cuts very consistently — no grain or knots. Heavy smoke, good ventilation required.
Cutting
| Setting | Value |
|---|---|
| Cut 3mm | 3000 mm/min @ 90% × 1-2 passes |
| Cut 6mm | 1500 mm/min @ 95% × 3 passes |
Engraving
| Setting | Value |
|---|---|
| Engrave Fill | 5000 mm/min @ 40% |
Settings
| Setting | Value |
|---|---|
| Air Assist | On — high pressure for MDF |
| Ventilation | High — MDF smoke is toxic required |
Tips
MDF produces a lot of fine dust. Run maximum ventilation. Sealed edges after cutting prevent moisture absorption.