Notes
Pine plywood cuts well but resin spots can cause inconsistency. Check for voids before cutting.
Tips
Inspect sheets for knots and resin pockets before cutting. Resin pockets absorb more energy and can cause burn-through.
Details
Pine plywood cuts well but resin spots can cause inconsistency. Check for voids before cutting.
Cutting
| Setting | Value |
|---|---|
| Cut 3mm | 3500 mm/min @ 85% × 1 pass |
| Cut 6mm | 1800 mm/min @ 90% × 2 passes |
Engraving
| Setting | Value |
|---|---|
| Engrave Fill | 5000 mm/min @ 35% |
Settings
| Setting | Value |
|---|---|
| Air Assist | On (required) |
Notes
| Setting | Value |
|---|---|
| Wood Quality | Use void-free laser ply for consistent results |
Tips
Inspect sheets for knots and resin pockets before cutting. Resin pockets absorb more energy and can cause burn-through.