Notes
Glow-in-dark PLA contains strontium aluminate phosphor particles which are abrasive. Prints like standard PLA but requires a hardened nozzle for extended use.
Tips
Replace brass nozzle with hardened steel for glow PLA — phosphor grit wears brass quickly. Standard PLA temps work well.
Details
Glow-in-dark PLA contains strontium aluminate phosphor particles which are abrasive. Prints like standard PLA but requires a hardened nozzle for extended use.
Temperatures
| Setting | Value |
|---|---|
| Nozzle | 220 °C |
| Bed | 55 °C |
| First Layer Bed | 60 °C |
Speed
| Setting | Value |
|---|---|
| Print Speed | 300 mm/s |
| First Layer Speed | 60 mm/s |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 100 % |
Retraction
| Setting | Value |
|---|---|
| Distance | 0.5 mm |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm |
| Flow Rate | 100 % |
Notes
| Setting | Value |
|---|---|
| Nozzle Type | Hardened steel recommended for extended printing important |
Tips
Replace brass nozzle with hardened steel for glow PLA — phosphor grit wears brass quickly. Standard PLA temps work well.