Notes
HIPS in the P1S enclosed chamber is excellent as a support material for ABS. Dissolves in limonene leaving clean surfaces.
Tips
Use with ABS dual-material for supports. Soak in d-limonene for 30-60min after print.
Details
HIPS in the P1S enclosed chamber is excellent as a support material for ABS. Dissolves in limonene leaving clean surfaces.
Temperatures
| Setting | Value |
|---|---|
| Nozzle | 245 °C |
| Bed | 100 °C |
| First Layer Bed | 105 °C |
Speed
| Setting | Value |
|---|---|
| Print Speed | 150 mm/s |
| First Layer Speed | 25 mm/s |
Cooling
| Setting | Value |
|---|---|
| Fan Speed | 0 % |
Retraction
| Setting | Value |
|---|---|
| Distance | 0.5 mm |
Quality
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm |
Tips
Use with ABS dual-material for supports. Soak in d-limonene for 30-60min after print.