Magigoo Pro PC
Magigoo
90–130
°C
Bed Temp
Overview
Specialized adhesive pen for Polycarbonate and PC-ABS printing. Applies to a heated bed surface and holds parts firmly during printing. Parts release easily when bed cools. Formulated specifically for high-shrinkage materials.
Properties
Difficulty
intermediate
Flexibility
flexible
Layer Adhesion
excellent
Enclosure
no
Heated Bed
required
Dry Storage
no
Pros
- Works specifically for PC and PC-ABS — few alternatives
- Clean release when cool
- No bed surface damage
- Pen applicator for controlled application
- Reusable bed
- Eliminates warping on PC
Cons
- Expensive per-application vs DIY options
- Needs reapplication every few prints
- Limited shelf life after opening
- Only needed for a narrow material set
Best For
- PC (Polycarbonate)|PC-ABS|PC-CF|High-temp materials
Avoid For
- PLA
- PETG (not needed)|SLA
Storage
Cap tightly after each use. Store at room temperature. Shake before use. 6-month shelf life after first use.
Laser Compatibility
Not applicable
Brands
Magigoo