Anycubic Kobra
Anycubic
⊕ Heated Bed
⬦ Auto-Level
180
mm/s
Max Speed
260°
C
Hotend
110°
C
Bed
50
µm
Min Layer
General
Width (X)
220.0 mm
Depth (Y)
220.0 mm
Height (Z)
250.0 mm
Connection
USB · TF Card
Controller
Marlin
Print Specs
Nozzle
0.4 mm
Filament
1.75 mm
Extruders
1
Compatible Materials
PLAPETGABSTPU
Software
Anycubic SlicerCuraOrca Slicer
About the Anycubic Kobra
The Anycubic Kobra is an FDM 3D printer, released in 2022. Its work area is 220×220×250mm.
It uses a 0.4 mm nozzle for 1.75 mm filament, a rated top speed of 180 mm/s, a minimum layer height of 50 µm.
The hotend tops out at 260°C and the bed at 110°C, which covers PLA, PETG, ABS and ASA but is marginal for nylon and polycarbonate.
The machine levels the bed automatically.
The machine runs Marlin, connects over USB · TF Card.
Supported software: Anycubic Slicer, Cura, Orca Slicer.
Materials listed: PLA, PETG, ABS, TPU.
More from Anycubic
- Anycubic Kobra 3
- Anycubic Kobra S1
- Anycubic Kobra 2
- Anycubic Kobra 2 Max
- Anycubic Kobra 2 Neo
- Anycubic Kobra 2 Plus
- Anycubic Kobra 2 Pro
- Anycubic Photon Mono 2