Seckit Go3
SecKit
500
mm/s
Max Speed
300°
C
Hotend
110°
C
Bed
⚙ This is a community-designed DIY/kit build. Print speed and temperatures are configured in firmware by whoever assembles it, not fixed by a manufacturer — so they're not listed as a single spec here.
General
Extruders
1
About the Seckit Go3
The Seckit Go3 is an FDM 3D printer, released in 2023 and sold as a DIY kit. Its work area is 310×310×300mm (350mm on Triple-Z variant).
It uses a rated top speed of 500 mm/s.
The hotend tops out at 300°C and the bed at 110°C, which is high enough for engineering filaments such as nylon, polycarbonate and carbon-fiber blends.
The machine has no heated bed, which limits you mostly to PLA.