Longer Ray5 20W — Acrylic (Cast)
Notes
Cast acrylic cuts cleanly with diode laser. Air assist essential for clean edges.
Tips
Cast acrylic only — extruded acrylic melts and fuses cut edges. Engrave opaque or colored cast acrylic.
Details
Cast acrylic cuts cleanly with diode laser. Air assist essential for clean edges.
Engrave
| Setting | Value |
|---|---|
| Engrave Speed | 400 mm/s |
| Engrave Power | 50 % |
| Engrave Passes | 1 |
| Line Interval | 0.08 mm |
Cut
| Setting | Value |
|---|---|
| Cut Speed | 10 mm/s |
| Cut Power | 100 % |
| Cut Passes | 3 |
Setup
| Setting | Value |
|---|---|
| Air Assist | On |
| Focus Method | Fixed focus per manufacturer spec |
| Bed Type | Honeycomb or knife-edge |
Notes
| Setting | Value |
|---|---|
| Tips | Cast only. Extruded acrylic will melt and fuse. |
Tips
Cast acrylic only — extruded acrylic melts and fuses cut edges. Engrave opaque or colored cast acrylic.