Longer Ray5 20W — Cast Acrylic - Clear
Notes
Transparent to 450nm - cannot engrave directly. Wet paper or black paint technique required.
Tips
Wet paper: damp towel flat on glass, laser through it, peel off. Results are frosted.
Details
Transparent to 450nm - cannot engrave directly. Wet paper or black paint technique required.
Setup
| Setting | Value |
|---|---|
| Technique | Wet paper towel or black paint required |
Engraving
| Setting | Value |
|---|---|
| Engrave With Technique | 1500 mm/min @ 60% |
Cutting
| Setting | Value |
|---|---|
| Cut 2mm | 400 mm/min @ 95% x3 |
| Cut 3mm | 300 mm/min @ 100% x4-5 |
| Cut 4mm | 200 mm/min @ 100% x6-8 |
Safety
| Setting | Value |
|---|---|
| Air Assist | Required for cutting |
Tips
Wet paper: damp towel flat on glass, laser through it, peel off. Results are frosted.