Wolfpawn 4040 Pro — Acrylic - Cast
Notes
O-flute single required - 2-flute bits cause melting and re-welding. Cast preferred over extruded.
Tips
Too slow = melts. Too fast = chips. O-flute single is non-negotiable.
Details
O-flute single required - 2-flute bits cause melting and re-welding. Cast preferred over extruded.
Bit Selection
| Setting | Value |
|---|---|
| Bit Profile | 1/8" O-flute single required |
General
| Setting | Value |
|---|---|
| Rpm | 7000-8000 RPM |
| Feed Rate | 700-900 mm/min |
| Plunge Rate | 200 mm/min |
| Doc | 1.0 mm per pass |
Settings
| Setting | Value |
|---|---|
| Note | Cast acrylic preferred over extruded for better edge quality |
Tips
Too slow = melts. Too fast = chips. O-flute single is non-negotiable.