Wolfpawn 4040 Pro — Baltic Birch Plywood
Notes
Compression bit is not optional - upcut alone tears the top veneer. Tabs every 100mm.
Tips
Climb cut on final pass for smoothest edges. Tab height 1.5mm makes removal easy.
Details
Compression bit is not optional - upcut alone tears the top veneer. Tabs every 100mm.
Bit Selection
| Setting | Value |
|---|---|
| Bit Profile | 1/8" compression bit required |
Profile / Pocket
| Setting | Value |
|---|---|
| Rpm 6mm | 8000 RPM - 6mm sheet |
| Feed 6mm | 1000 mm/min - 6mm sheet |
| Doc All | 3 mm per pass all thicknesses |
| Rpm 9mm | 8000 RPM - 9mm sheet |
| Feed 9mm | 900 mm/min - 9mm sheet |
| Rpm 12mm | 7500 RPM - 12mm sheet |
| Feed 12mm | 800 mm/min - 12mm sheet |
Workholding
| Setting | Value |
|---|---|
| Tabs | 4mm wide x 1.5mm high every 100mm of perimeter |
V-Carving
| Setting | Value |
|---|---|
| V Carve Bit | 60deg V-bit |
| V Carve Feed | 1200 mm/min |
Tips
Climb cut on final pass for smoothest edges. Tab height 1.5mm makes removal easy.