Wolfpawn 4040 Pro — Delrin / POM (Acetal)
Notes
Very consistent material. Tight tolerances achievable. Great for gears, bushings, wear parts.
Tips
Very repeatable once dialed in. Great surface finish.
Details
Very consistent material. Tight tolerances achievable. Great for gears, bushings, wear parts.
Bit Selection
| Setting | Value |
|---|---|
| Bit Profile | 1/8" 2-flute carbide |
General
| Setting | Value |
|---|---|
| Rpm | 8000 RPM |
| Feed Rate | 1000 mm/min |
| Plunge Rate | 250 mm/min |
| Doc | 1.5 mm per pass |
Tips
Very repeatable once dialed in. Great surface finish.