Wolfpawn 4040 Pro — Hardwood - Oak
Notes
Hard, stringy, prone to tearout. Multiple light passes essential. Sharp bit non-negotiable.
Tips
Listen for chatter and back off feed. Climb cut on final profile pass for smooth walls.
Details
Hard, stringy, prone to tearout. Multiple light passes essential. Sharp bit non-negotiable.
Bit Selection
| Setting | Value |
|---|---|
| Bit Profile | 1/8" 2-flute upcut carbide Genmitsu MC40A or equivalent |
Profile / Pocket
| Setting | Value |
|---|---|
| Rpm | 8000-10000 RPM |
| Feed Rate | 600-700 mm/min |
| Plunge Rate | 200 mm/min |
| Doc | 1.0-1.5 mm per pass |
Finishing
| Setting | Value |
|---|---|
| Finish Bit | 1/8" ball nose Genmitsu BN10A or equivalent |
| Finish Feed | 700 mm/min |
| Finish Doc | 0.2 mm |
| Finish Stepover | 5-10% of bit diameter |
V-Carving
| Setting | Value |
|---|---|
| V Carve Bit | 60deg V-bit Genmitsu WC04A 60 deg |
| V Carve Feed | 800 mm/min |
| V Carve Rpm | 9000 RPM |
Tips
Listen for chatter and back off feed. Climb cut on final profile pass for smooth walls.