Wolfpawn 4040 Pro — HDPE
Notes
Excellent machinability, almost no tearout. Very forgiving. Good for jigs and fixtures.
Tips
O-flute single for best chip clearing. HDPE is self-lubricating. No coolant needed.
Details
Excellent machinability, almost no tearout. Very forgiving. Good for jigs and fixtures.
Bit Selection
| Setting | Value |
|---|---|
| Bit Profile | 1/8" O-flute single Genmitsu OS10B or equivalent |
General
| Setting | Value |
|---|---|
| Rpm | 8000 RPM |
| Feed Rate | 1200 mm/min |
| Plunge Rate | 300 mm/min |
| Doc | 2 mm per pass |
Tips
O-flute single for best chip clearing. HDPE is self-lubricating. No coolant needed.