Wolfpawn 4040 Pro — MDF (CNC / Laser)
Notes
MDF variant entry — same settings as MDF.
Tips
Same as MDF entry.
Details
MDF variant entry — same settings as MDF.
Roughing
| Setting | Value |
|---|---|
| Spindle Rpm | 18000 RPM |
| Feed Rate | 1500 mm/min |
| Depth Per Pass | 2 mm |
| Stepover | 40 % of bit dia |
Finishing
| Setting | Value |
|---|---|
| Finish Feed Rate | 2000 mm/min |
| Finish Depth | 0.5 mm |
Tooling
| Setting | Value |
|---|---|
| Recommended Bit | 2-flute downcut 1/8" |
| Bit Size | 1/8" or 1/4" depending on detail |
Notes
| Setting | Value |
|---|---|
| Wolfpawn Notes | Test on scrap. Always secure workpiece firmly. |
Tips
Same as MDF entry.