Wolfpawn 4040 Pro — Pine / Softwood
Notes
Pine is a soft, forgiving material for the Wolfpawn. Good for first projects.
Tips
Knots can cause bit deflection — slow down near knots. Sharp bits essential.
Details
Pine is a soft, forgiving material for the Wolfpawn. Good for first projects.
Roughing
| Setting | Value |
|---|---|
| Spindle Rpm | 16000 RPM |
| Feed Rate | 2000 mm/min |
| Depth Per Pass | 3 mm |
| Stepover | 45 % of bit dia |
Finishing
| Setting | Value |
|---|---|
| Finish Feed Rate | 2500 mm/min |
| Finish Depth | 0.5 mm |
Tooling
| Setting | Value |
|---|---|
| Recommended Bit | 2-flute upcut 1/4" |
| Bit Size | 1/8" or 1/4" depending on detail |
Notes
| Setting | Value |
|---|---|
| Wolfpawn Notes | Knots are harder — reduce feed rate near knots. |
Tips
Knots can cause bit deflection — slow down near knots. Sharp bits essential.