Notes
Polycarbonate routes cleanly but melts if too slow. Keep chip load high.
Tips
Fast feed to avoid friction melting. Sharp bits. Air blast to clear chips.
Details
Polycarbonate routes cleanly but melts if too slow. Keep chip load high.
Roughing
| Setting | Value |
|---|---|
| Spindle Rpm | 18000 RPM |
| Feed Rate | 2000 mm/min |
| Depth Per Pass | 2 mm |
| Stepover | 45 % of bit dia |
Finishing
| Setting | Value |
|---|---|
| Finish Feed Rate | 2500 mm/min |
| Finish Depth | 0.5 mm |
Tooling
| Setting | Value |
|---|---|
| Recommended Bit | 2-flute upcut 1/8" |
| Bit Size | 1/8" or 1/4" depending on detail |
Notes
| Setting | Value |
|---|---|
| Wolfpawn Notes | Fast feed prevents friction melting. Sharp bits only. |
Tips
Fast feed to avoid friction melting. Sharp bits. Air blast to clear chips.