Notes
UHMW similar to HDPE. Most slippery plastic — secure firmly.
Tips
Very slippery — double-sided tape AND clamps. Low chip welding risk.
Details
UHMW similar to HDPE. Most slippery plastic — secure firmly.
Roughing
| Setting | Value |
|---|---|
| Spindle Rpm | 16000 RPM |
| Feed Rate | 1800 mm/min |
| Depth Per Pass | 2 mm |
| Stepover | 50 % of bit dia |
Finishing
| Setting | Value |
|---|---|
| Finish Feed Rate | 2500 mm/min |
| Finish Depth | 0.5 mm |
Tooling
| Setting | Value |
|---|---|
| Recommended Bit | O-flute single 1/4" |
| Bit Size | 1/8" or 1/4" depending on detail |
Notes
| Setting | Value |
|---|---|
| Wolfpawn Notes | Secure very well — UHMW is slippery and can shift. |
Tips
Very slippery — double-sided tape AND clamps. Low chip welding risk.