Wolfpawn 4040 Pro — XPS Insulation Foam
Notes
Very easy to machine at high speeds. Good for molds, patterns, and packaging.
Tips
Upcut or 2-flute both work well. Very high feed rates possible.
Details
Very easy to machine at high speeds. Good for molds, patterns, and packaging.
Bit Selection
| Setting | Value |
|---|---|
| Bit Profile | 1/8" single flute or 2-flute |
General
| Setting | Value |
|---|---|
| Rpm | 8000 RPM |
| Feed Rate | 3000 mm/min |
| Plunge Rate | 1000 mm/min |
| Doc | 10 mm per pass |
Tips
Upcut or 2-flute both work well. Very high feed rates possible.