Wolfpawn 4040 Pro — MDF
Notes
MDF is the ideal CNC practice material. Consistent density, clean cuts.
Tips
Use downcut bit to prevent tear-out on face. Vacuum chips frequently — MDF dust is very fine.
Details
MDF is the ideal CNC practice material. Consistent density, clean cuts.
Roughing
| Setting | Value |
|---|---|
| Spindle Rpm | 18000 RPM |
| Feed Rate | 1500 mm/min |
| Depth Per Pass | 2 mm |
| Stepover | 40 % of bit dia |
Finishing
| Setting | Value |
|---|---|
| Finish Feed Rate | 2000 mm/min |
| Finish Depth | 0.5 mm |
Tooling
| Setting | Value |
|---|---|
| Recommended Bit | 2-flute downcut 1/8" |
| Bit Size | 1/8" or 1/4" depending on detail |
Notes
| Setting | Value |
|---|---|
| Wolfpawn Notes | Dust collection essential — MDF dust is hazardous. |
Tips
Use downcut bit to prevent tear-out on face. Vacuum chips frequently — MDF dust is very fine.